CO2 monitor -1023

Air Quality Monitors

CO2 monitor -1023

Availability: In Stock
  • Pay with:
  • Category: Automation Products
Rs. 13,200.00
CO2 monitor is an ideal instrument to check the quality of air that you breathe. It has digital numbers to indicate the present air pollution condition in the room.  The air quality monitor checks for carbon dioxide gas (CO2) suspended in the air.  CO2 is a major cause of respiratory diseases and lung infection in modern cities.  It also monitors and displays ambient temperature and humidity in the atmosphere.
  • CO2 range: 200ppm to 10,000ppm
  • Temperature: 0C to +50C
  • Humidity: 0 to 100 %rH
  • CO2 sensor accuracy: ± 50ppm
  • Temperature accuracy: ± 2 C
  • Humidity: ± 5 %rH
 A very useful, effective CO2 monitor unit to measure carbon dioxide gas density. It measures the pollution level at homes.  The monitor displays the instantaneous CO2 density and displays (in ppm).  It also shows temperature and humidity values. The unit is easy and simple to use, moreover it needs no installation.  The unit starts operating by mere plugging in the power supply adapter.  This air quality monitor has an elegant look with bright LCD.
  • A tabletop CO2 monitor to show the ambient value of CO2 (in ppm)
  • The CO2 monitor displays instantaneous values of carbon dioxide in the atmosphere
  • The monitor also has temperature and humidity sensing
  • Moreover, the CO2 monitor quantifies the indoor air level as GOOD, NORMAL, POOR and ALARM (as per readings)
  • A reliable tool to check the quality and functionality of air purifier operation in a room
  • A very elegant display, designed to operate for 24×7
  • CO2 monitor has the capability to display carbon dioxide readings in offices, houses, factories etc.
  • Needs no maintenance and no installation procedure, just power up and start using
  • Type of sensor used:
    • Optical: PM2.5
    • NDIR: CO2
    • Capacitive: Temperature and Humidity
  • Range of measurement and accuracy
    • CO2 range: 200ppm to 10,000ppm
    • Temperature: 0C to +50C
    • Humidity: 0 to 100 %rH
    • CO2 sensor accuracy: ± 50ppm
    • Temperature accuracy: ± 2 C
    • Humidity: ± 5 %rH
  • Operating voltage: 12VDC (110-22VDC to 12VDC adapter provided alongwith)
  • We suggest to typically use for indoor purpose
  • The unit can also be equipped for outdoor installations (within an enclosure)

 

Now, with these CO2 monitors, you can easily check if the air purifier in your room is working as expected.  The monitor can inform the CO2 concentration in the room.  The sensor is inside the top end of the monitor.  The air flows through the sensor unit by the principle of convection. An internal heater causes a temperature difference, thereby allowing air to flow. A NDIR (non dispersive infra red) sensor is used to accurately calculate the CO2 concentration.

The CO2 monitor is a table-top sensing unit with LCD.  It can also be mounted on the wall.  To turn on the machine, connect the DC jack to the adapter provided.  Then plug in the adapter to the house mains power supply.  The adapter is 110-220VAC to 12VDC converter.  It takes a booting time of around 1-2 minutes after power up (before the 1st reading appears).  

Incase the readings fail to appear for more than 4-5 minutes, then blow some air at the top orifice.

Dimensions of the monitor: 180 mm x 180 mm x 30 mm

LCD dimensions: 70 mm x 55 mm

We produce 2 varieties of CO2 monitors:

Model FBXTHCO2G: lemon green display

Model FBXTHCO2W: bluish white display

Both the monitors are technically of same functionality.  The LCD backlight color is different in both of them. Additionally the CO2 monitor quantify the quality of air and report it as GOOD, or NORMAL or POOR.  This is done by scaling the present readings.