Injection Moulding Controllers-SR11 1038

Controllers

Injection Moulding Controllers-SR11 1038

Availability: In Stock
  • Pay with:
  • Category:
Rs. 23,411.00
  • Complete set for temperature control in injection
  • molds with heated channels.
  • System equipped with 1 or up to 8 controllers in one
  • housing (depending on the version).
  • Built-in 15 A SSR output for each control zone
  • (output resoluti on: 0.1 A).
  • PID control with autotuning and Fuzzy logic algorithm
  • ensuring a high-temperature control accuracy and
  • optimal energy consumption.
  • “Soft start” function enables the mold preheating.
  • Monitoring of the leakage current of a heater.
  • Signaling of breaks, short-circuits and inverse polari-
  • zati on of the sensor.
  • Measurement of the heater leakage current and
  • detection of the maximal current exceeding.
  • Measurement of the load current, detection and
  • damage signaling.
  • Emergency work mode after the thermocouple
  • damage with a mean power delivered before
  • the damage with a mean power delivered before
  • the damage or with the output turned off.
  • RS-485 interface with MODBUS protocol (ASCII and
  • RTU modes) for connection with PC, recorders
  • or other Modbus devices.
  • Decreased temperature mode (remote activation
  • with logic input or local activation using the buttons).
  • Relay output to signal the alarm states.

 

Datasheet User Manual